Paint and Coatings Pigging Systems
Recover valuable paint and coatings from your process lines
HPS pigging systems help paint, coatings, resins, adhesives, and industrial liquid manufacturers recover product from pipelines before flushing, cleaning, or color changeovers.
By removing residual product from process lines, our pigging technology helps reduce product waste, lower cleaning requirements, reduce solvent or water use, and improve production efficiency.
- Recover more paint, coatings, resins, and liquid product from pipelines
- Reduce waste during cleaning and changeovers
- Lower solvent, water, and flushing requirements
PROVEN SUCCESS
0 +
Years’ experience designing and implementing pigging systems
0 +
Pigging and liquid product recovery solutions implemented worldwide
0.00 %
Typical recovery efficiency from full pipelines with HPS pigs
Product recovery for paint, coatings and industrial liquids
Paints, coatings, resins and similar products can leave significant amounts of valuable liquid behind in process pipelines. This leftover product is often lost during flushing, cleaning, or color changeovers.
HPS pigging systems recover this residual product by using a specialist projectile, or “pig”, to push product through the pipeline to its intended destination.
This helps manufacturers recover more saleable product while reducing waste and cleaning losses.
“Recover product from pipelines before it is lost to flushing, cleaning, or changeovers.”
Benefits of HPS paint and coatings pigging systems
HPS pigging systems help manufacturers recover more product, reduce waste and improve changeover efficiency.
Product Recovery
Recover valuable paint, coatings, resins and liquid product from pipelines before cleaning or changeovers.
Waste Reduction
Reduce product loss during flushing, cleaning and colour changeovers.
Faster Changeovers
Improve colour and batch changeover efficiency while reducing downtime between product runs.
Lower Cleaning Losses
Reduce solvent, water and flushing requirements before cleaning begins.
It can also help lower cleaning costs, reduce cross-contamination between batches, and make production more efficient.
Designed around your process
Every HPS pigging system is tailored to your product, pipeline layout, production process and recovery goals.
Our systems can be designed for a wide range of industrial liquid applications, including:
- Paints
- Coatings
- Resins
- Adhesives
- Chemicals
- Inks
- Oils
- Lubricants
- Similar viscous or valuable liquid products
Whether you need to recover product before cleaning, reduce losses during changeovers, or improve production efficiency, HPS can design a system to suit your process.
Why use pigging for paint and coatings?
Pigging is especially useful where valuable product remains inside pipelines after transfer. Instead of flushing this product to waste, the system recovers it before cleaning begins.
This can help manufacturers:
- Increase product yield
- Reduce raw material losses
- Use less solvent or water during cleaning
- Speed up changeovers between colors or batches
- Reduce waste disposal requirements
- Improve overall process efficiency
Expert Support
Speak to a pigging system specialist
Our engineers can review your process and help identify where pigging could reduce paint and coatings waste, improve product recovery and support more efficient production.